Guide

TizenTube: Installing the Standalone App on Samsung TVs

What TizenTube is, how to install the current standalone version on Samsung TVs, and how it differs from the older TizenBrew module approach.

CurrentLast updated: 2026-10-01Last checked: 2026-10-01

TizenTube is an open-source, installable Tizen app that provides a modified YouTube experience on Samsung's Tizen-based smart TVs — ad blocking, SponsorBlock support, and interface tweaks the stock YouTube app doesn't offer. As of the current Standalone v2.x release (v2.1.1 as of this writing), it installs and runs as its own app on the TV, TizenTube loads the TV version of YouTube and applies its own modifications, adding features such as ad blocking, SponsorBlock, and additional interface options.

It's not made, distributed, or endorsed by Samsung or YouTube/Google. It's built and maintained by an independent developer on GitHub.

Quick answer

TizenTube is specific to Samsung Tizen smart TVs. The current recommended way to install it is the standalone app — it does not require installing or running TizenBrew. Per the project's official installation guide, setup uses Apps2Samsung, a separate sideloading tool, with developer mode enabled on the TV. It has no Android counterpart — if you're on Android TV, Google TV, or Fire TV instead of a Samsung Tizen TV, the relevant project is the separate, related TizenTube Cobalt (see below), not this one.

Standalone vs. the older TizenBrew module

TizenTube has two installation modes: the current Standalone app (v2.x, v2.1.1 as of this writing), which runs on its own and doesn't need TizenBrew at all, and an older module mode that runs inside TizenBrew, a separate module-loader project. This guide covers the standalone install, which is the current recommended approach. The module route still exists and is covered in the TizenBrew guide if you're already using TizenBrew for other things.

Not the same as TizenTube Cobalt

TizenTube and TizenTube Cobalt are two separate projects from the same author that target different platforms. TizenTube (this page) runs on Samsung Tizen TVs. TizenTube Cobalt is a different app, built on the Cobalt app container, for Android TV, Google TV, and some Fire TV devices — see its guide if that's what you're on. One naming overlap to be aware of: the current Samsung release also includes a build for newer TVs (Tizen 6 and later) whose file and release notes mention "Cobalt". That is still the Samsung app described on this page, not the Android TV project.

What TizenTube actually changes

Depending on the release, TizenTube commonly includes things like:

Ad-blocking style adjustments to the playback experience.
SponsorBlock support to skip sponsored segments automatically.
Interface tweaks aimed at TV remote navigation, and video speed control.

Exactly which features are present, and how well they work, depends on the release — this is an actively maintained project, so specifics can shift between updates.

Not a Samsung or YouTube feature

TizenTube is an unofficial, third-party app. It isn't reviewed, supported, or sanctioned by Samsung or YouTube.

Compatibility

Platform	Status	Notes
Samsung TV	Supported	Built specifically for Samsung's Tizen-based smart TVs. The current release installs as a standalone app; an older release ran as a TizenBrew module instead.
Android	Unsupported	TizenTube is built for Samsung's Tizen platform and has no Android counterpart. See TizenTube Cobalt for the Android-based equivalent.
Android TV	Unsupported	Android TV devices do not run Tizen, so TizenTube itself does not apply here. TizenTube Cobalt is the separate project built for Android TV and Google TV.
Fire TV	Unsupported	Fire TV does not run Tizen. TizenTube Cobalt is the related project that targets Fire TV instead.
Firefox	Unsupported	TizenTube is a TV app, not a browser extension.

TizenTube only applies to Samsung's Tizen operating system, which is what runs on Samsung's own smart TVs — it has nothing to do with Android TV, Google TV, Fire TV, or Android phones. It's also unrelated to Firefox, which is a different platform entirely. If you're not on a Samsung Tizen TV, this specific project isn't an option for you — see TizenTube Cobalt above for the Android TV/Fire TV counterpart, or the compatibility table for the full picture.

Requirements

A Samsung Tizen smart TV running Tizen 3 (2017) or later. The project provides one build for Tizen 6 (2021) and later and another for Tizen 3 to 5.5.
A computer (or an Android phone) on the same local network as the TV, to run the Apps2Samsung tool used for setup.
Developer mode enabled on the TV.

TizenBrew is not a requirement for the standalone install.

Before you start

Enable developer mode on the TV: open the Apps screen, type 12345 on the remote to open the hidden developer options dialog, turn Developer mode to On, and enter your computer's IP address under Host PC IP. The TV typically needs a restart after this.

How to install TizenTube on a Samsung TV (standalone, current recommended method)

The steps below summarize the project's official installation guide, which is the source to follow if anything differs.

Download the latest release of Apps2Samsung from the Apps2Samsung releases page and install it on your computer or Android phone.
Complete the developer mode setup described above, with the Host PC IP set to the IP of the computer or phone running Apps2Samsung, then reboot the TV.
Open Apps2Samsung and select your TV from the list, or enter its IP address manually.
Select TizenTube as the release and download the build for your TV. The guide lists three: TizenTubeCobalt.wgt for Tizen 6 (2021) and later, TizenTubeCobaltTizenTubeProxyAddress.wgt for Tizen 6 and later TVs that have trouble with the default proxy address, and TizenTubeOld.wgt for Tizen 3, 4, 5 and 5.5.
In Apps2Samsung's settings, enable Force Samsung Certificate and Partner Signing (on Android, set the certificate type to Partner and enable Force Samsung Certificate).
In the Release dropdown choose Custom WGT File, select the file you downloaded, and click Install.
On older Tizen versions, the guide says you may need to set the Host PC IP to 127.0.0.1 and reboot the TV after installation, otherwise playback problems are possible.

TizenBrew is not part of this install

The current standalone app doesn't require the TizenBrew runtime and doesn't run as a TizenBrew module. TizenBrew is a separate project that you only need for its own module ecosystem.

The older module approach

An earlier version of TizenTube ran only as a module inside TizenBrew, rather than as its own app. That path still exists: install TizenBrew first, and TizenTube can run inside it as a module (added via TizenBrew's module manager as the NPM module @foxreis/tizentube). There's generally no reason to use this route today unless you're already running TizenBrew for other modules and prefer to keep everything in one place — the standalone app is the current recommended install for TizenTube specifically.

Updating

The project's documentation doesn't describe an in-app auto-updater for the standalone app as of this writing. Check TizenTube's GitHub releases periodically, and reinstall the new build the same way as the first time when a new version — currently v2.1.1 — is available.

Uninstalling

Since the standalone app installs as its own Tizen app, remove it the same way: from the TV's Apps screen, select TizenTube and remove it through the TV's normal app-management options.

Troubleshooting

The installer can't find or connect to the TV Double-check that developer mode is on, that the Host PC IP entered on the TV matches your computer's actual local IP, and that both devices are on the same network. A TV restart after enabling developer mode is often required.

TizenTube shows "A network error has occurred" on launch The official guide attributes this to the TV being unable to reach TizenTube's local proxy server. Listed causes: "Force Samsung Certificate" and "Partner Signing" weren't enabled during install; the TV can't resolve the default proxy address (the guide offers the TizenTubeCobaltTizenTubeProxyAddress build for this, which needs your DNS to resolve tizentube to the TV's static IP); the TV runs Tizen 5.5 or earlier, which the Cobalt build doesn't support (use TizenTubeOld.wgt); no internet connection; or, after a cold boot, the proxy hasn't finished starting, so wait a few seconds and retry.

TizenTube stops working after a TV or YouTube update Because it loads and modifies the YouTube experience through its own local proxy, a Tizen firmware update or a change on YouTube's side can break it until the project catches up. Check the project's GitHub Issues page to see whether it's a known, already-being-addressed problem.

Playback stops with a verification or "confirm you're not a bot" prompt The standalone app's local proxy can occasionally be flagged by YouTube's own traffic detection, which can interrupt playback with a verification challenge — this has been reported as a known limitation of the proxy approach rather than a one-off bug. Check the project's GitHub Issues page for the current workaround or fix status.

Limitations

Setup still requires a computer (or an Android phone) on the same network and developer mode on the TV — there's no way to install it from the TV alone, even though TizenBrew itself isn't required anymore.
The standalone app relies on a local proxy to load and modify the YouTube TV experience, which has been reported to occasionally trigger YouTube's own traffic-verification checks and interrupt playback.
It's not an official Samsung or YouTube feature, so there's no guarantee it keeps working after a TV firmware update or a YouTube change.
As with any actively developed project, features and stability can vary between releases.

Alternatives

If the developer-mode setup isn't something you want to deal with, a few other options exist:

Your Samsung TV's stock YouTube app — the default, unmodified option with no setup required.
TizenTube Cobalt — the related project for Android TV, Google TV, and some Fire TV devices, if you're not on a Samsung Tizen TV.
SmartTube vs. TizenTube — a comparison if you're deciding between this and a differently-built project for Android TV.
Compatibility overview — see which solutions actually apply to your specific device.

Frequently asked questions

Does TizenTube work on all Samsung TVs?

It targets Samsung's Tizen-based smart TVs, but exact compatibility depends on your TV's model year and firmware version. Check the project's GitHub repository for current details before installing.

Does TizenTube Standalone require TizenBrew?

No. The current TizenTube Standalone release does not require the TizenBrew runtime, and it does not run as a TizenBrew module. The official installation guide uses Apps2Samsung to install it on the TV as its own app. Older TizenTube versions used a TizenBrew module-based approach; that route still exists, but it isn't the recommended path anymore.

Can I install TizenTube without a computer?

No. Setup uses an installer tool (Apps2Samsung) running on a computer or an Android phone connected to the same network as the TV, with developer mode enabled on the TV.

What's the current version of TizenTube?

Standalone v2.1.1 as of this writing (released September 2026). Check the project's GitHub releases page for anything newer.

Will a Samsung firmware update break TizenTube?

It's possible. Because TizenTube modifies the YouTube experience on the TV, a firmware or app update can change things enough that it needs to be reinstalled or updated. Availability and compatibility may change over time.

Does TizenTube work on Android TV or Fire TV?

No — this TizenTube is built specifically for Samsung's Tizen operating system. The same author maintains a separate, related project called TizenTube Cobalt for Android TV, Google TV, and some Fire TV devices; check its own repository for current compatibility.

Official source

For the most accurate and current information, check the project's own website, repository, or documentation.

Visit official source: TizenTube on GitHub (github.com)